Cost to replace ice maker in whirlpool refrigerator

Q: How much does it cost to replace a refrigerator ice maker?

The cost to replace a refrigerators ice maker is around $300 to $450 for the replacement unit and labor costs of hiring a local refrigerator repair specialist.

Q: How long should an icemaker last?

Factors such as how much its used and how well its maintained affect how long a machine lasts. Seldom, though, will an ice machine last longer than 10 years if it is used everyday. A safe estimate would be roughly 4 to 5 years, or within the warranty of the machine.

Updated: Dec. 20, 2017

Table of Contents Show

Installing a replacement icemaker is simple.

Family Handyman

No ice cubes to cool your beverage because your fridge icemaker is on the fritz? You can buy a replacement icemaker and install it without breaking a sweat. It's simple.

Install a new icemaker

Photo 1: Remove screws on old icemaker

Use a nut driver or a long screwdriver to remove the screws that hold the icemaker in place.

Photo 2: Plug wiring harness together

Line up the wiring harnesses and plug them together before screwing the icemaker in place.

Photo 3: Install new inlet valve

Remove the old inlet valve and plug in the new one, then attach it to the frame.

Photo 4: Attach water line

Push the water supply from the inlet valve onto the barbed fitting at the top of the refrigerator.

If your icemaker stops working, there’s no need to call the appliance repair service. First, do some icemaker troubleshooting. Locate the saddle valve that’s clamped to the house water supply and turn it off and on a few times to break up any mineral buildup clogging the valve. If that doesn’t work, unplug the refrigerator and remove the icemaker (Photo 1) to make sure the water inlet at the back of the refrigerator isn’t plugged with ice (just heat it with a hair dryer if it is). However, if the water supply isn’t blocked and the refrigerator is older, it’s time to replace the icemaker. According to appliance repair pros, most icemakers break down long before the refrigerator. The good news is that most replacement kits are simple to install.

Locate the model number on the wall of the refrigerator just inside the door, then buy a new icemaker at an appliance store or online (do a search for “appliance parts”).

Unplug the refrigerator and turn the water off, then take the old icemaker out and disconnect the wiring. Plug the new icemaker in (Photo 2), hold it in position and screw it to the refrigerator wall. Pull the refrigerator out from the wall, disconnect the water supply from the inlet valve at the bottom of the refrigerator, then replace the old inlet valve (Photo 3). Inlet valves should be replaced when the icemaker is replaced, and are usually included with replacement kits. If not, order it separately.

Before you push the refrigerator back, turn the water on and check for leaks.

Required Tools for this Project

Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.

Originally Published: December 19, 2017

Similar Projects

Popular How-To Videos

ⓘ

Whirlpool Refrigerator Ice Maker Assembly

Item # 4455397

Grid is 1 inch square

Ice maker kit that includes two wire harnesses. The ice maker itself will have part number WPW10300024 on it when you receive it. That is the correct ice maker that comes inside this kit. Must install new harness at same time for it to work.

OEM Part - Manufacturer #W10882923

Whirlpool Refrigerator Ice Maker Assembly

Item # 1857

Grid is 1 inch square

Refrigerator icemaker. This item does not include a new shut off arm. To remove the existing shut off arm from the old icemaker, lift it to the up position, unhook it from the fill cup bearing, and pull it out of the module.

OEM Part - Manufacturer #4317943

Whirlpool Refrigerator Ice Maker Assembly

Item # 915772

Grid is 1 inch square

Refrigerator icemaker assembly, modular style. The new icemaker does not include a new cover, ice level arm, or wire harness, these components will need to be reused from original icemaker.

OEM Part - Manufacturer #D7824706Q

Whirlpool Refrigerator Ice Maker Assembly

Item # 1016069

Grid is 1 inch square

Refrigerator Icemaker assembly. This icemaker fits models that have the icebucket in the door. The bottom mounting bracket on the old icemaker must be reused.

OEM Part - Manufacturer #2198597

Whirlpool Refrigerator Ice Maker Assembly

Item # 3436855

Grid is 1 inch square

Add-on icemaker kit. Icemaker has 4 wire 8 terminal plug for freezer connection. *For 4 wire flat terminal IM see Recommended Parts.

OEM Part - Manufacturer #WPW10715709

Whirlpool Refrigerator Ice Maker Assembly

Item # 1471727

Grid is 1 inch square

Refrigerator replacement icemaker. Does not include front cover or shut-off arm, use these parts from old icemaker. Makes 8 radius ice cubes. If the mold where cubes are made is flaking or corroded it is time for a new ice maker assembly. *Use model number to find correct icemaker.

OEM Part - Manufacturer #WPW10190965

Whirlpool Refrigerator Ice Maker Assembly

Item # 1875826

Grid is 1 inch square

Replacement ice maker. The new icemaker does not include a new ice level arm, or wire harness, these components will need to be reused from original icemaker.

OEM Part - Manufacturer #WPW10300022

Whirlpool Refrigerator Ice Maker Assembly

Item # 1875826

Grid is 1 inch square

Replacement ice maker. The new icemaker does not include a new ice level arm, or wire harness, these components will need to be reused from original icemaker.

OEM Part - Manufacturer #WPW10300022

Whirlpool Refrigerator Ice Maker Assembly

Item # 3452006

Grid is 1 inch square

Refrigerator add-on icemaker kit with 4 wire flat connector and harness for freezer. This kit includes the icemaker, ice bin, inlet valve, fill tube, and hardware. *For 4 wire 8 terminal IM see Recommended Parts.

OEM Part - Manufacturer #WPW10715708

How much does it cost to replace a refrigerator ice maker?

The cost to replace a refrigerator's ice maker is around $300 to $450 for the replacement unit and labor costs of hiring a local refrigerator repair specialist.

How long does a whirlpool ice maker last?

Ice makers will need to be replaced every 3-10 years depending on the frequency of usage, and water quality. You can perform a voltage test with a multimeter or perform an inlet valve test.

What is the average cost to repair an ice maker?

The national average cost range to repair an ice maker is $150 to $250. Most homeowners pay around $200 to fix a leaking, freestanding ice maker. The low cost for this project is $75 to replace a valve on a portable ice maker. The cost is $400 to replace the motor on a high-end, built-in ice maker.

How long should an icemaker last?

Factors such as how much it's used and how well it's maintained affect how long a machine lasts. Seldom, though, will an ice machine last longer than 10 years if it is used everyday. A safe estimate would be roughly 4 to 5 years, or within the warranty of the machine.