How much is a yard of dirt in cubic feet

How much is a yard of dirt in cubic feet
When Gravel or Dirt suppliers ask how many yards you need they are talking about a cubic yard. A cubic yard is a measurement that is 3 feet by 3 feet by 3 feet. A cubic yard measures volume where a ton measures weight. A yard of topsoil usually weighs about 1,800 pounds and a yard of gravel usually weighs about 2,200 pounds.  

How Much Does A Cubic Yard Cover?

At a depth of 3 inches, a cubic yard of material can be spread over a 10×10 area (100 square feet). It’s always good to understand how something is done even if you are going use calculators.  Calculations can get tougher for round areas so we have created online calculators for rectangle areas and round areas. See below…

Calculator for Rectangular Areas

Calculator for Round Areas

How much is a yard of dirt in cubic feet

Once You Use the Calculators, It’s Easy to Request an Order

If you require immediate delivery, please call your order in at (859) 635-5680.

Request A Quote | Click Here

About Bray Topsoil & Gravel

Topsoil and gravel delivered to you by Bray Topsoil & Gravel, a specialized aggregate hauler servicing the Kentucky, Ohio, and Indiana region.The experts at Bray Topsoil and Gravel serve the needs of residential and commercial customers.

      How much soil or mulch to buy can be a mystery, and it never seems to go as far as we think it should. These are guide lines, not rules because soil settles. For example I built 2 vegetable beds that were 20′ X 4′ and 6″ deep. I calculated I wound need 40 cubic feet of soil for each bed. I wound up using 52 cubic feet in one and 48 in the other, after the soil settled naturally. I didn’t walk on it or tamp it down. That is 25% more than I initially figured, but those beds are level with the top on the 6″edging.

 Bulk Soil

  1. Bulk soil is measured in yards.                                                        
  2. 1 yard equals 27 cubic feet.      
  3. Think about it as a cube that is 3′ X 3′ X 3′.         
  4.  All machinery that can load bulk soil  is, by law, labeled as to the volume of the scoop.
  5. Our machine is 1/2 yard per scoop. 

To calculate the amount of bulk soil you need, you need to:     

  1. Figure out how many square feet you want to cover. This is length X width and is refered to as square feet.                                                                                        
  2. Decide how deep you want the soil or mulch to be, in inches. 

Then you can follow this example to figure out what to get.

  • For example, you might have 220 square feet to cover and want to add 2 inches of mulch.
  • The formula is (220 X 2) divided by 324 (you’re just going to have to trust us on this number)= 1.36 yards. 
  • Remember to add up to 25% more for settling.
  • So by multiplying 1.36 X 1.25 (how to add 25% more) it comes up to 1.70 yards.
  • You will probably be fine with 1.5 yards.     

 The formula is: 

  • (area in square feet X depth of soil in inches) divided by 324 = total yards (X 1.25 to allow for settling).    
  • If you need help, just call us at 281-440-5161.    

Bagged Soil

 Bulk soil is not for everyone.  Yes, it is more expensive to buy bagged soil, but there are some advantages. Bags keep your car or  truck cleaner, can be bought a few at a time (as needed), and you  don’t need to shovel it out of a truck and then shovel into the flower bed.  I don’t have a truck but my small SUV can easily carry 14 bags of soil, which is a yard…and I didn’t have to pay for delivery!

By using the formula for bulk soil (above) to figure out how much you will need, figuring out how many bags it equals, is a breeze.  Bagged soil is usually measured in cubic feet, so convert the number of yards to cubic feet by, multiplying by 27 (the number of cubic feet in 1 yard). Let’s go back to our example from above.

We calculated that we would need about 1.5 yards.

  • 1.5 X 27 = 40.50 cubic feet (lets round it up to 41).
  • The mulch we want to use comes in 2 cubic foot bags.
  • We then divide 41 by 2 (cu.ft. per bag) which equals 20.5 bags (lets round it up to 21).

The formula to convert yards to bags is:  

  •  (number of yards X 27) divided by (the number of cubic feet in the bag, of soil  or mulch you’re buying).

A few types of soil are measured by weight. Suppliers do this for one simple reason. When anything weighs over 40 pounds, it becomes very hard for the average person to pick up. Guessing how these soils are going to fit into your formula is tricky. We suggest that you compare them to the size of a bag that is labeled by volume. If a bag of top soil weighs 40 lbs, but is 1/3 the size of a 2 cubic foot bag of mulch, you’re going  to need 3 bags of top soil to equal the same volume as 1 bag of mulch. If that doesn’t make sense…just call, because I couldn’t figure out how to word that differently.

                                                 Basic guide lines for spreading soils
                 2 cubic foot bag                            3 cubic foot bag  
   100 200 1,000       100 200 1,000  
 Depth of mulch     sq.ft.     sq.ft.      sq.ft.  Depth of mulch    sq. ft.    sq. ft.     sq. ft.  
           2″    8 bags   16 bags    80 bags           2″   6 bags  12 bags   60 bags  
           3″   12 bags   24 bags   120 bags           3″   9 bags  18 bags    90 bags  
           4″ 15 bags 30 bags 150 bags 4″ 11 bags 22 bags 110 bags

Remember you can always call us or your local independent nursery for help.

How do you measure 1 yard of dirt?

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 27 (the amount of cubic feet in a yard).

How much does 1 yard of dirt look like?

One yard of topsoil covers 324 square feet of soil with a depth of 1 inch, or 100 square feet with a depth of 3 inches.

How much space is a yard of dirt?

A yard of any material will cover approximately 100 square feet at 3 inches of depth.

What is a yard of soil?

Bulk soil is measured in yards. 1 yard equals 27 cubic feet. Think about it as a cube that is 3′ X 3′ X 3′. All machinery that can load bulk soil is, by law, labeled as to the volume of the scoop.