Download the latest drivers and utilities for your device.
Notification of end of support products
The product version upgrade of Direct Print has been terminated. Maintenance support for the existing customers will
continue until September 30, 2022.
For more information, please contact Konica Minolta Service Desk or your service provider.
As of March 31, 2022, we have ended handling Box Operator and the provision of downloads and support.
For more information, please contact Konica Minolta Service Desk or your service provider.
As of March 31, 2022, we have ended handling Print Status Notifier and the provision of downloads and support.
For more information, please contact
Konica Minolta Service Desk or your service provider.
As of March 31, 2022, we have ended handling HDD TWAIN Driver and the provision of downloads and support.
For more information, please contact Konica Minolta Service Desk or your service provider.
The product version upgrade of PageScope Net Care Device Manager has been terminated as of July 31, 2021.
Maintenance support for the existing customers will continue until June 30, 2022.
As an alternative service,
Fleet RMM is available.
For more information, please contact Konica Minolta Service Desk or your service provider. For details
close
27 Aug 2021Product Termination and Alternative Product Information
The product
version upgrade of PageScope Net Care Device Manager has been terminated as of July 31, 2021.
Maintenance support for the existing customers will continue until June 30, 2022.
As an alternative service, Fleet RMM is available.
For more information, please contact Konica Minolta Service Desk or your service provider.
As of September 30, 2017, we discontinued dealing with Copy Protection Utility on our new products. In addition, provision and support of download
ended on September 30, 2018.
As a substitute for Copy Protection Utility, on Web Connection which is installed standardly in multi-function printers, you can use the same function (copy protection and registration of stamp information). For more information, please contact Konica Minolta customer service or service provider. For details
close
1 Oct 2018Important notice regarding the end of the support
As of September 30, 2017, we discontinued dealing with Copy Protection Utility on our new products. In addition, provision and support of download ended on September 30, 2018.
As a substitute for Copy Protection Utility, on PageScope Web Connection which is installed standardly in multi-function
printers, you can use the same function (copy protection and registration of stamp information). For more information, please contact Konica Minolta customer service or service provider.
biz.konicaminolta.com Website Management Team
Konica Minolta, Inc.
PageScope NDPS Gateway and Web Print Assistant have ended provision of download and support services. For details
close
1 Oct 2018Information on old solution software
PageScope NDPS Gateway and Web Print Assistant have ended provision of download and support services.
biz.konicaminolta.com Website Management Team
Konica Minolta, Inc.
PageScope Net Care has ended provision of download and
support service. Net Care Device Manager is available as a succeeding product with the same function.
For more information, please contact Konica Minolta customer service or service provider. For details
close
1 Oct 2018Information on the end of the support and on succeeding products
PageScope Net Care has ended provision of download and support service. Net Care Device Manager is available as a succeeding product with the same function.
Click here to download
For more information, please contact Konica Minolta customer service or service provider.
biz.konicaminolta.com Website
Management Team
Konica Minolta, Inc.
The printer can be connected with Bonjour, LPD, or IPP.
After configuring the network setting for this machine, select this machine as the printer to be used in the [Printers & Scanners] window (the [Print & Fax] window for OS X 10.7/10.8) to enable printing.
Adding a printer
Click the Apple mark, and then select [System Preferences] from the [Apple Menu].
Click the [Printers & Scanners] icon.
Click [+]. When the menu appears, click [ Add (Other) Printer or Scanner].
Click [Default].
Connected printers are detected.
If no printer is detected, turn this machine off, then on again.
In this case, turn off this machine, and then wait approximately 10 seconds before turning it on again. If you turn this machine on immediately after turning it off, it may not function correctly.
From the [Printer Name] list, select the desired Bonjour-connected model name.
The printer driver corresponding to the selected printer name is automatically selected.
To check the printer name, select [Administrator Setting] - [Network Setting] - [NIC Setting] - [Bonjour Setting] of this machine. In the default setting, the contents enclosed in parentheses ( ) suffixed in [Bonjour Name] correspond to the low-order three bytes of the MAC address. The following window shows an example where the printer name is changed to ''Printer Name''.
After the printer driver is selected, go to Step 7.
If an incorrect printer driver is selected, go to Step 6.
Select the desired printer driver manually. Select [Select (Printer) Software] from [Use (Print Using)], and then select the printer driver from the list that is displayed in the separate window.
Select the printer driver under the following name.
KONICA MINOLTA 190PS(P) or KONICA MINOLTA C71cfPS(P)
Click [Add].
When the selected printer is registered in the [Printers & Scanners], the setting procedure is completed.
Configuring the LPD settings
[TCP/IP Setting] for this machine
Specify the IP address for this machine.
[LPD Setting] for this machine
To use LPD printing in [LPD Setting] on the last page of [Detail Setting], set LPD Setting to [Enable].
For details about IP address settings and [LPD Setting] of this machine, refer to NIC Setting: Setting the Machine Network Information.
Configuring [TCP/IP Setting] for the computer
Configure the TCP/IP settings for the Macintosh computer connected to the printer.
Click the Apple mark, and then select [System Preferences] from the [Apple Menu].
Click the [Network] icon.
The Ethernet setting window appears.
Select [Ethernet] and click [Details].
Click the [TCP/IP] tab.
Configure the settings including the IP address and subnet mask according to the settings of the network to which the Macintosh computer is connected.
Click the close button at the top left corner of the window. When the [Would you like to apply your changes before closing the Network preferences pane?] message appears, click [Apply].
Adding a printer
Click the Apple mark, and then select [System Preferences] from the [Apple Menu].
Click the [Printers & Scanners] icon.
Click [+]. When the menu appears, click [ Add (Other) Printer or Scanner].
Click [IP] or [IP Printer].
In [Protocol], select [Line Printer Daemon - LPD].
In [Address], enter the IP address for this machine.
The printer driver corresponding to this machine being identified with its IP address is automatically selected.
After the printer driver is selected, go to Step 8.
If an incorrect printer driver is selected, go to Step 7.
Select the desired printer driver manually. Select [Select (Printer) Software] from [Use (Print Using)], and then select the printer driver from the list that is displayed in the separate window.
Select the printer driver under the following name.
KONICA MINOLTA 190PS(P) or KONICA MINOLTA C71cfPS(P)
Click [Add].
When the selected printer is registered in the [Printers & Scanners], the setting procedure is completed.
Configuring the IPP settings
[TCP/IP Setting] for this machine
Specify the IP address for this machine.
[HTTP Server Setting] for this machine
In [HTTP Server Setting] set [IPP Setting] to [Enable].
For details about IP address settings and [HTTP Server Setting] of this machine, refer to NIC Setting: Setting the Machine Network Information.
Configuring [TCP/IP Setting] for the computer
Configure the TCP/IP settings for the Macintosh computer connected to the printer.
Click the Apple mark, and then select [System Preferences] from the [Apple Menu].
Click the [Network] icon.
The Ethernet setting window appears.
Select [Ethernet] and click [Details].
Click the [TCP/IP] tab.
Configure the settings including the IP address and subnet mask according to the settings of the network to which the Macintosh computer is connected.
Click the close button at the top left corner of the window. When the [Would you like to apply your changes before closing the Network preferences pane?] message appears, click [Apply].
Adding a printer
Click the Apple mark, and then select [System Preferences] from the [Apple Menu].
Click the [Printers & Scanners] icon.
Click [+]. When the menu appears, click [ Add (Other) Printer or Scanner].
Click [IP] or [IP Printer].
In [Protocol:], select [Internet Printing Protocol - IPP].
In [Address:], enter the IP address for this machine. In [Queue], enter "ipp".
The printer driver corresponding to this machine being identified with its IP address is automatically selected.
After the printer driver is selected, go to Step 8.
If an incorrect printer driver is selected, go to Step 7.
Select the desired printer driver manually. Select [Select (Printer) Software] from [Use (Print Using)], and then select the printer driver from the list that is displayed in the separate window.
Select the printer driver under the following name.
KONICA MINOLTA 190PS(P) or KONICA MINOLTA C71cfPS(P)
Click [Add].
When the selected printer is registered in the [Printers & Scanners], the setting procedure is completed.