Shark rotator lift away adv duoclean powerfins upright vacuum

Model:LA502

This powerful Shark® Rotator® is equipped with DuoClean® PowerFins, a two-brushroll, no-bristle system to deep-clean and pick up more in every pass (vs. original DuoClean®)—all with no hair wrap, thanks to the self-cleaning brushroll.

Includes Five (5) Year Limited Warranty

Shark’s best-seller, evolved.

Shark’s groundbreaking Lift-Away franchise has evolved—Lift Away the pod and clean above the floor, or pick up more in every pass (vs. original DuoClean®) with DuoClean PowerFins.

DuoClean PowerFins

This dual-brushroll system picks up more dirt in every pass (vs. original DuoClean®)—with no hair wrap. PowerFins deliver continuous cleaning contact on carpets & floors, while a soft roller leaves a polished look on floors.

PowerFins

PowerFins deliver continuous cleaning contact on all surfaces, digging deep into carpets and directly engaging floors with better pet hair pickup vs. Shark bristle nozzles.

Self-cleaning brushroll

Powerfully pulls in long hair and pet hair, sending it straight to the dust cup—no more hair wrap.

Lift Away the pod and clean everywhere.

Tackle all floors with power

Incredible suction combines with DuoClean PowerFins to dig deep into carpets and directly engage floors.

Powerful cleaning above the floor

Lift Away the pod and clean everywhere above the floor, from stairs to windowsills.

Powerful pet hair pickup

In Lift-Away mode, attach an accessory and tackle stubborn pet hair on upholstery and more.

Anti-Allergen Complete Seal

Captures 99.99% of dust & allergens

Shark’s famous Lift-Away® technology now has a lighter pod and a convenient pod-release pedal to clean above the floor. This lightweight vacuum also features DuoClean® PowerFins: a PowerFin roller and a soft roller combine on all floors. Continuous cleaning contact to dig deep into carpets, directly engage floors, and pick up more in every pass. (vs. original DuoClean®)
• DuoClean® PowerFins: A PowerFin roller and a soft roller combine on all floors. Continuous cleaning contact to dig deep into carpets, directly engage floors, and pick up more in every pass. (vs. original DuoClean®)
• Self-cleaning brushroll for powerful pet hair pickup with no hair wrap.
• Engineered to pick up more hair with no hair wrap (vs. shark bristle nozzles)
• Lift-Away® the detachable pod with the easy-to-use pod-release pedal to clean stairs, furniture, and everywhere in your home.
• Anti-Allergen Complete Seal Technology® and a HEPA filter trap 99.9% of dust and allergens inside the vacuum cleaner. (Based on ASTM F1977 of particles .3 microns or larger.)
• A lighter pod than Shark's best-selling Lift-Away, with more suction for versatile whole-home cleaning. (weight and suction vs. NV351, suction measured at the hose.)
• Powerful LED headlights on the nozzle reveal hidden debris around your home.
• Advanced Swivel Steering lets you easily maneuver your vacuum in and out of tight spaces, in corners, around furniture, and more.
• Includes tools to tackle stubborn pet hair and hard-to-reach spaces.

Free shipping on all orders over $75*

SharkNinja offers a 60-day money back guarantee for purchases from this Site, or for select products, a 90-day money back guarantee. The applicable money back guarantee will be stated with your order.*does not apply outside of Canada. Orders to be shipped to Northwest Territories, Yukon or Nunavut or other territories outside of Canada or to an international address are subject to a surcharge.

• Crevice Tool
• Self-Cleaning Pet Power Brush
• Pet Power Brush

How and when do I adjust the suction?

The settings on the suction control slider on the handle adjusts suction power.

Note: Ensure the power/surface switch is set to the correct floor type before adjusting suction power.

• For low pile carpets, set the suction control slider to MAX for best results.
• For high-pile carpets or area rugs, set the suction control slider to MIN. Using less suction will improve maneuverability and make it easier to push and pull the vacuum.
• For hard floors, set the suction slider to the MAX setting.

How do I assemble my vacuum?

• Insert the wand into the pod.
• Insert the handle into the wand.
• Connect the hose into the back of the pod, until it clicks into place.

For proper operation, ensure all parts are firmly clicked into place.

How do I clean above floors with or without accessories?

Press the handle release button on the back of the handle. Gently pull up on the handle to remove it from the wand.

For more cleaning reach, leave the handle on the wand, and detach the wand from the floor nozzle. Press the Wand Release button on the top of the pod, then gently pull up on the handle to remove the wand.

Attach an accessory to the handle or the wand and begin cleaning.

How do I use the different cleaning modes?

This Shark® vacuum has three powerful settings for cleaning located right below the power button.

To clean bare floors, tile, and low pile area rugs:

• Slide the surface selector switch to Hard Floor.
• Press the power button, tilt the handle back while gently stepping on the floor nozzle. Note that the brushroll will spin slower in this mode.

Note: Use Hard Floor setting for max suction when cleaning above floors and for easier maneuverability on low pile area rugs

To clean low pile carpets:

• Slide the surface selector switch to the middle setting; Carpet/Low Pile .
• Tilt the handle back while gently stepping on the floor nozzle.

To clean thick carpets:

• Slide the surface selector switch to the top setting; Thick Carpet.
• Tilt the handle back while gently stepping on the floor nozzle. Note that the brushroll will spin in faster this mode.

Note: Move the suction control slider on the handle to MIN to reduce suction when vacuuming carpets. Slide to MAX for more suction on bare floors.

When and how do I clean the filters?

Filters may need to be cleaned if the vacuum stops picking up dirt, if airflow is restricted, or if you notice lighter or no suction. For optimal performance, clean filters regularly. Between cleanings, lightly tap filters over a trash receptacle to remove dust and debris as needed.

Rinse the pre-motor foam and felt filters every 3 months, or as needed.

• First, remove the dust cup to access the pre-motor filters.
• Slide up the release latches on both sides of the dust cup handle. Lift the dust cup up and away from the pod.
• Remove the foam and felt filters.
• Rinse both filters with water only.
• Allow filters to air-dry completely (at least 24 hours) before reinstalling.
• Once dry, install the felt filter first, followed by the foam filter.
• Reinstall the dust cup by placing the bottom of the dust cup into the pod and then tilting until it clicks into place.

Rinse the post-motor HEPA filter every 12 months, or as needed.

• Pull the latch under the HEPA filter cover and lift off the cover. This is located underneath the Lift-Away® logo on the bottom of the pod.
• Remove the HEPA filter by pulling on the tab underneath the pod.
• Rinse with water only.
• Allow filter to air-dry completely (at least 24 hours) before reinstalling.
• Once dry, reinstall the HEPA filter.
• Reattach the HEPA filter cover until it clicks into place.

When and how do I empty the dust cup?

For optimal performance, empty the dust cup each time you vacuum, or when debris reaches the MAX FILL line.

• Slide up the release latches on both sides of the dust cup handle. Lift the dust cup up and away from the pod.
• Hold the dust cup over the trash and press the bottom door release button on the back.
• Tap gently to empty contents.
• Close the dust cup door, pressing it until it clicks into place.
• If needed, turn the dust cup upside down over the trash and pull the top door release tab.
• Tap gently to remove contents. Clear debris from the cone-shaped screen.
• Wipe the interior of the dust cup clean.
• To reinstall, place bottom of dust cup into the pod and then tilt until it clicks into place.

Parts & Accessories

You may also like

Shark® Rotator® Lift-Away® ADV DuoClean PowerFins Upright

Is the shark rotator worth it?

What is the difference between a Shark Navigator and rotator?

What does DuoClean mean for Shark vacuum?

Is there a recall on Shark vacuums?