As WiFi becomes more a part of our everyday lives, figuring out how to fix it when it’s “broken” is crucial. Wondering why your phone isn't connecting to WiFi? Here are some simple troubleshooting steps to take when your phone won’t connect to WiFi that should solve your connectivity issues and get you up and running again in no time. Show
Enjoy WiFi access on the go with millions of free Xfinity WiFi hotspots nationwide.
Never ask "why won't my phone connect to WiFi?" again. With Xfinity Mobile, you get America’s largest and most reliable network combined with the most WiFi hotspots nationwide. It’s the only network that gives you access to millions of Xfinity WiFi hotspots so you can save money. For more information on how to conserve mobile data through Xfinity Mobile's auto-connect capabilities and unlimited data plans, check out Xfinity Mobile's plans and pricing today. Android smartphone and tablet users now abound in the enterprise, making Android Wi-Fi connection troubleshooting a key element of enterprise wireless network connection management.In our wireless network troubleshooting tip, we explained how to debug physical, AP, router and Windows connection problems. But what if you're having trouble with Android Wi-Fi connections on a smartphone or tablet? Check out these step-by-step tips for Android device Wi-Fi connection troubleshooting. Step 1: Verify AP and router settingsStart by verifying that a wireless access point (AP) or router is nearby and actively offering Wi-Fi service. Always start here, using another Wi-Fi client to determine which is the likely culprit, the network or the client. If multiple clients are unable to connect, follow instructions in our wireless network troubleshooting tip to debug probably AP or router or upstream network problems. Otherwise, proceed to step 2 to debug the affected Android client. Step 2: Verify wireless adapterVerify that your Android Wi-Fi adapter is enabled. Before going any further, make sure that your Android device's Wi-Fi radio is not in Airplane Mode and that Wi-Fi is on and ready to connect. Tap Settings > Wireless & Networks > Wi-Fi as shown in Figure 1. If Wi-Fi is off, tap the slider to turn Wi-Fi on. When Wi-Fi is on, a signal indicator appears at the top right corner of your home screen. Properly connected Wi-Fi takes precedence over mobile broadband, but it can be helpful to disable your device's mobile network connection while debugging Wi-Fi. Step 3: Check SSID and IP addressVerify your Android client is connected SSID and IP address. Return to your Android device's Settings > Wireless & Networks > Wi-Fi panel and tap Wi-Fi Settings. Find your network's name (SSID) on the list of nearby Wi-Fi networks.
Note that whenever you're trying to connect an Android Wi-Fi client to any network name, status is displayed on the Wi-Fi Settings panel, in the row labeled Wi-Fi. When status is Connected, tap Advanced to view the client's assigned IP address.
Step 4: Verify network connection with PingOnce your Android Wi-Fi client has a valid IP address, use Ping to verify network connectivity. Most Android devices do not include a user-accessible ping app, but you can still verify network connectivity as follows.
Step 5: Wireless-specific connection problemsIf your Android Wi-Fi client still cannot connect, get a valid IP address or ping any other system connected to the same subnet, it's time to look for wireless-specific problems. The AP/router and client must use compatible 802.11 standards. Please note the following:
To determine which 802.11 standards your wireless network’s AP or router supports, look for “Wi-Fi certified” logos, or search for Wi-Fi certified products at the Wi-Fi Alliance website. In general, newer APs and routers are required to provide backward compatibility with older generations of Wi-Fi, but data rate settings must still match. Once you have confirmed that your AP or router and client should be compatible, debug wireless radio settings as described in our wireless network troubleshooting tip, step 6. Step 6: Check security settingsIf a compatible wireless client and AP/router can "hear" each other but still cannot connect or exchange traffic, look for a security mismatch. The client must support the security mode required by the AP or router: Open, WEP, WPA, or WPA2. Unless a WLAN is open (i.e., unsecured), both endpoints must be configured with (or dynamically receive) identical keys to encrypt traffic between them. Compare security settings on your AP/router and Android Wi-Fi client and attempt to match them.
If you choose the wrong security type when adding a network, it may still be saved. You can change the password (or any other security parameter) associated with a saved network by tapping the network's name. However, it is often easier just to click Forget for any misconfigured network and start fresh. Step 7: Check RADIUS settingsEnsure RADIUS is working. WPA-Enterprise and WPA2-Enterprise log the Android Wi-Fi client into the network and deliver encryption keys using an 802.1X-capable RADIUS server. Refer to our network troubleshooting tip, step 8, to check your AP or router's RADIUS settings. Step 8: Check 802.1X EAP issuesIf RADIUS is working but your Android Wi-Fi client's connect requests are rejected, look for an 802.1X Extensible Authentication Protocol (EAP) problem. Your client must support one of the EAP types required by your RADIUS server and must supply a valid login.
If the only entry in the list is unspecified, you must first add a certificate file to your device. To do so, copy a certificate to a storage location accessible from your device (see Figure 6). Hint: Email the file to yourself and save it to your device, or upload the file onto Google Drive. Next, go to the Settings > Security panel. Tap Install from storage and choose the storage location of your certificate file. You may be prompted for a password to unlock the file. The certificate will be loaded into your Android device’s credential storage and should now appear as an option when selecting an EAP-TLS client or CA/RADIUS server certificate.
Step 9: Check for intermittent network connectionsIf your Android Wi-Fi client still cannot seem to connect to the network, seems very slow all the time or disconnects frequently, you may be experiencing lower-level wireless problems. Refer to our network troubleshooting tip, steps 10 and 11, for further instructions. To facilitate debugging, you may also want to install a few more free apps. For example, see the following:
Next StepsLearn more about mobile operating systems in this Essential Guide Are you ready to start developing for Android? This was last published in October 2015 Dig Deeper on Mobile and wireless network technology
|